Japanese Summer: Cooling My DGX Sparks!
Introduction
Hi, I am Zaizen, an engineer at INDX. My day-to-day work focuses primarily on LLM security.
My previous write-up: [$4,500] Remote Code Execution Vulnerability in Meta's Manus AI
Last month, I realized that to survive as an engineer in the years ahead I would need local LLMs, so I bought two DGX Sparks. (You end up wanting a second one anyway, so it is safest to buy two from the start.)
The one thing that worried me was heat. So I designed an airflow path to exhaust the heat from both DGX Sparks, and I would like to share how it turned out.
Making the Case
I used Codex's goal command to have it design a case that holds two DGX Sparks.
As reference material, I gave it NVIDIA's official design documents and the design documents for an MSI product, an OEM equivalent of the DGX Spark. The design and simulation were done with OpenSCAD and OpenFOAM.
I had it manufactured by JLC3DP: about ¥24,000, including a review of the 3D data and a one-week express turnaround.
How is it this cheap?
Assembly
Noctua NF-A14 iPPC-3000 PWM (140 mm, 3,000 RPM) — Amazon.co.jp
XYZA USB to 12 V PWM fan cable with switch (XA-PWM12VSW) — Amazon.co.jp
Running It
Room temperature 26 °C, humidity 60%.
Video: the fan at 3,000 RPM (X)
It's a gale!! So I bought a fan controller.
4-pin 12 V PWM fan controller with USB-C power and a 5-way splitter hub — Amazon.co.jp
Running It (Second Try)
Video: running with the fan controller (X)
In a cool room, even 1,250 RPM is plenty!
Parts Cost
¥33,182 in total.
| Item | Price |
|---|---|
| Case | ¥24,000 |
| Fan | ¥4,769 |
| Fan controller | ¥4,413 |
| Total | ¥33,182 |
Original Japanese Article
This write-up is an English translation of my original Japanese article: