Blog

Japanese Summer: Cooling an External NVMe SSD with a Desk Fan

· 1 min read

Before Cooling

Translation note This article is an English translation of a Japanese article originally published on Zenn.

I use the enclosure below, and when I put it under heavy load it gets hot enough to fry an egg on.

UGREEN M.2 SSD enclosure (40 Gbps, Thunderbolt 4 / USB4, fanless) — Amazon.co.jp

Measurement
$ sudo smartctl --all /dev/disk0
Before cooling: 54 °C
SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
Critical Warning:                   0x00
Temperature:                        54 Celsius


Adding a Desk Fan

While looking for a way to get the heat out, I came across reports that even a desk fan cools these enclosures quite well, so I bought one to try.

Sanwa Direct 400-CLN040 USB cooling fan (12 cm, quiet) — Amazon.co.jp

Let's try it right away.



After Cooling

UGREEN external NVMe SSD enclosure sitting on top of a USB desk fan
The enclosure on top of the desk fan.
After cooling: 32 °C
SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
Critical Warning:                   0x00
Temperature:                        32 Celsius

It cools better than I expected, and the noise doesn't bother me either.

A good purchase.



Original Japanese Article

This write-up is an English translation of my original Japanese article:

日本の夏、外付けNVMeを卓上ファンで冷却してみた — Zenn

« All posts

Japanese Summer: Cooling an External NVMe SSD with a Desk Fan 0%
12:00 PM